Thanks mate

Hi all
Wondering what the 2 vacuum ports are for on the back of my 304 v8 intake manifold just below dizzy.

Terrible photo but location

Hey guys.
I have a barb fitting tapped into a 2nd hand 304 I've just acquired.
It's tapped into drivers side engine block.
Would this be a feed or return?
Thanks in advance.
Alex

Hey I'm currently in the market for another turbo for my 304 v8 that comes underload at lower rpm but doesn't restrict hp too much. The one I purchased was off ebay and doesn't come into boost until dangerously high rpm which has caused me some internal issues. The turbo was a t4 with an a/r of 1.05...

A Conrod broke into 4 peices hole in crank, sump oil pick-up and piston still in cylinder and dropped all coolant.
Was a good effort.
Thanks for advice.

Hey guys
I've taken out the 304 from my vt which has seen its end.
Wondering if I swap out the dizzy onto a non roller motor will I be able to run the motor in my vt?

Thanks guys for all the help.
Was the ignition module in the end.

Vt 5l no spark.
Getting injector pulse.
Replaced coil 12v to coil.
Only just put the motor back in everything was running fine prior.
Ignition fuse popping randomly sometimes.
Ignition module only 6 months old but feels very hot.

Hi I have smoke coming from spark plug hole when running I pull the plug and it has oil on it.
Done a compression test and it is running at 115 psi as are all the others.
Wondering where the oil is coming from.
Thanks Alex