Does anyone know the location of the software switch in the Green Oak 2368K?
EEC - derbyws
Black Oak - HPT (or switch)
Silver Oak - HPT (or switch)
Green Oak 1536K - HPT (or switch)
Green Oak 2368K (can't find)
Copperhead - HPT (or switch)
MEDC17 TC-1791 - Switch
MEDC17 TC-1797 - Switch
MDG1 TC-277 - Switch
MDG1 TC-298 - Switch
* switch is the sw switch noted in the hex+a2l or xdf
Thanks All
PATS OFF / PATS DISABLE
-
von1
- Posts: 3
- Joined: Wed Jul 03, 2024 8:38 pm
- cars: 2004 F250 5.4 EEC-V,
-
DWS
- Posts: 254
- Joined: Tue Oct 12, 2021 12:04 am
- cars: Tons of Toyotas, 2003 cavi derby car, ford trucks, etc.
- Location: USA
Re: PATS OFF / PATS DISABLE
Oh neat I made it on the list for EEC's
Sadly I have zero experience with Green Oak myself so not really much help
. I'm sure that list is useful for people coming from google though. The Ford side of things sadly has a fair bit of a lack of info with out really digging into things. Like it took me forever to work out what's needed to do EEC-V computers and even after I spent $450 on one set of hardware, another program said I needed different hardware which was another $500. Ended up both works with the software but the wording at the time wasn't super clear.
Sadly I have zero experience with Green Oak myself so not really much help
Ford EEC-V Tuner Site
- Immo Off, PATS, Security only currently
- Bank Swapping
- View VIN and other info about the bin file
-
keysersoze
- Posts: 5
- Joined: Sat Mar 14, 2020 3:03 am
Re: PATS OFF / PATS DISABLE
On the Green Oaks there is no "switch". I have only ever been able to get it solved by patching the file.
-
f4ordy
- Posts: 13
- Joined: Mon May 13, 2024 4:05 am
- Location: South Australia
Re: PATS OFF / PATS DISABLE
Would you mind sharing how to patch the green oak files? I'm very interested in knowing how to do it.keysersoze wrote: Fri Mar 07, 2025 3:52 am On the Green Oaks there is no "switch". I have only ever been able to get it solved by patching the file.
-
keysersoze
- Posts: 5
- Joined: Sat Mar 14, 2020 3:03 am
Re: PATS OFF / PATS DISABLE
Which Green Oaks are you working on specifically?
-
f4ordy
- Posts: 13
- Joined: Mon May 13, 2024 4:05 am
- Location: South Australia
Re: PATS OFF / PATS DISABLE
I looked at Green Oak 2368K a while ago & didn't find a solution
-
ocerrr
- Posts: 8
- Joined: Thu Nov 21, 2024 10:25 pm
- cars: bmw e60 m5, e87 1er
benz cls63 w219, slk r170
audi q7 v12 tdi
caddy cts-v cts escalade
ford explorer 1gen
nissan c34 laurel
toyota jz80 ls3 swap
Re: PATS OFF / PATS DISABLE
any more info on tc-277 remove pats?
-
Esox
- Posts: 6
- Joined: Sat Aug 08, 2026 9:37 pm
- cars: Ford 6.0L PSD
Re: PATS OFF / PATS DISABLE
I am interested in how to turn PATS off for the Black Oak 448K PCM (Ford 6.0L PSD 2003-2005 Excursion) with stock calibrations. Example bin attached.
You do not have the required permissions to view the files attached to this post.
-
Esox
- Posts: 6
- Joined: Sat Aug 08, 2026 9:37 pm
- cars: Ford 6.0L PSD
Re: PATS OFF / PATS DISABLE
I found it! For VXBC4NC, BIN 0x66854 = 01 for PATS Disabled, 00 for PATS Enabled. This applies only to the VXBC4xx calibrations as this location moves with other calibration generations.
-
DWS
- Posts: 254
- Joined: Tue Oct 12, 2021 12:04 am
- cars: Tons of Toyotas, 2003 cavi derby car, ford trucks, etc.
- Location: USA
Re: PATS OFF / PATS DISABLE
FYI, since Ford has created a "file name" for the calibrations, it seems like the rule has been always to drop the last 2 characters (super early era maybe 3) and that's the strategy, aka the code base which means all addresses like the pats flag will be in the same location every time.
So VXBC4 strategy.
So VXBC4 strategy.
Ford EEC-V Tuner Site
- Immo Off, PATS, Security only currently
- Bank Swapping
- View VIN and other info about the bin file