VS High Level BCM
VS High Level BCM
Anyone got any wiring info on High level 147 or 149 VS BCM's, mainly want battery and data line so i can hook this one in on the bench.
- Holden202T
- Posts: 10328
- Joined: Sat Feb 28, 2009 9:05 pm
- Location: Tenambit, NSW
- Contact:
Re: VS High Level BCM
i have factory wiring diagram for VR ... not sure if they are the same or not ?
No matter what the question is, the answer is always more horsepower!
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Re: VS High Level BCM
yeh perhaps high level will be, i only have low levels for vs which have different/extra plugs
-
- Posts: 2906
- Joined: Sun Aug 02, 2009 9:16 pm
- Location: Bayside, Melbourne, Victoria
- Contact:
Re: VS High Level BCM
I'm on a break ATM but could possibly find out when back!
- TTVN
- Posts: 194
- Joined: Tue Jun 30, 2009 10:01 pm
- cars: TT 355 VN, Rearmount turbo 355 vp, cammed 355 hj60 landcruiser, vx clubby n efilive VZ ls1 wagon
Re: VS High Level BCM
vr vs appear same ill post pics for future reference
- Attachments
-
- vrvs high bcm.png (487.17 KiB) Viewed 8188 times
Re: VS High Level BCM
Yep these are the pins.
+ = C1
- = C2
Data = B7
+ = C1
- = C2
Data = B7
-
- Posts: 2906
- Joined: Sun Aug 02, 2009 9:16 pm
- Location: Bayside, Melbourne, Victoria
- Contact:
Re: VS High Level BCM
Cool glad you got it sorted, sorry I didn't have info in my Rellin book(model too old) was meaning to get info from VACC, but they can only fax & normally picture quality isn't 100%!
With the later BCM's I know I've had to use a lot more than 3 wires for test bench, but I guess a lot of them may not be necessary I haven't tried cutting wires down!
With the later BCM's I know I've had to use a lot more than 3 wires for test bench, but I guess a lot of them may not be necessary I haven't tried cutting wires down!