VT-VX Clusters

[VX L67 Getrag]

Well there's errors now all over the eeprom so it will need a full re-write now, but good idea for future!

B.T.W. the first line does match the 2nd it's just all zero's now!

So I'm guessing you tried extra power to both units?

[kody]

Yeah madmn I have tried to write back to the cluster several times.
The bin file I am writing back is the original bin dump that came from that cluster, the ODO value has not been changed at all. I think the 93S56 chip might have some sort of security measure as each time I have tried to write back only 3 or 4 lines seem to go through correctly.

Yeah VX L67 I also tried with the cluster powered up as well as the programer having a 9v power pack

[kody]

Next question.

Is there a way with the gq4x programmer to write say 2 program lines at a time. Then reading back to check that they went through ok. I seem to be able to write the bottom 3 lines then nothing else seems to write to the chip.

Sorry if this is a basic question but have not had a lot of experience with this and trying to share/give back to you guys any thing that I can.
Have spent a lot of time reading here and learnt so much, it would be nice to be able to contribute if I can.

[antus]

There is offset and size that should allow you to do this but in many cases it doesnt work. So you can try it - perhaps it works on that serial eeprom - but be aware it may be just throwing another problem in to the mix.

[madmn]

i've have the EEprom fully mapped now, tell what you want to change

to activate the digital speedo change $FB from 00 to 02

[VX L67 Getrag]

Kody's problem in particular isn't now just changing a certain feature he now needs a full write!

I'm not sure how digital speedo is even possible on vt-vx range?

[madmn]

photo.JPG (47.55 KiB) Viewed 4298 times

[VX L67 Getrag]

COOL, never seen it enabled on the VT-VX clusters, thats 1 of the I think 24 flags that can be enabled!

[kody]

That digital speedo is cool as. I have not had much time over the weekend to have any more of a play with the cluster but it seems now that 70% of the info is on there and in the right spots.

[VX L67 Getrag]

So What have you done different to get 70% of the info in the correct locations?
Good news though, hopefully will get it there!